Table of Contents
Advertisement
IP Addressing Commands
ip name-server
ip name-server
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
An IP application will receive the IP addresses in the following order:
•
IPv6 addresses in the order specified by the command.
•
IPv4 addresses in the order specified by the command.
Use the no format of the command with the
delete the specified addresses. The entry is deleted if all its addresses are
deleted.
Example
switchxxxxxx(config)# ip host accounting.website.com 176.10.23.1
To configure the DNS servers, use the ip name-server Global Configuration mode
command.
To disable the DNS servers, use the no form of this command.
Syntax
server-address1
ip name-server
no ip name-server
Parameters
server-address1
•
server-address2
•
additional name servers.
Default Configuration
No DNS server is configured.
Command Mode
Global Configuration mode
Example
server-address2
[
—IPv4 or IPv6 addresses of a single name server.
server-address8
...
—(Optional) IPv4 or IPv6 addresses of
address1...address8
argument to
server-address8
...
14
]
230
Advertisement
Table of Contents
