Passwords Complexity Enable - Cisco 220 Series Smart Plus Reference Manual

AAA Commands

passwords complexity enable

passwords complexity enable
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
The minimum length is 8.
The number of classes is 3.
The default for no-repeat is 3.
All other controls are enabled by default.
Command Mode
Global Configuration mode
Example
The following example changes the minimum required password length to 10
characters:
switchxxxxxx(config)# passwords complexity min-length 10
To enforce the minimum password complexity, use the passwords complexity
enable Global Configuration mode command.
To disable enforcing the password complexity, use the no form of this command.
Syntax
passwords complexity enable
no passwords complexity enable
Parameters
N/A
Default Configuration
Password complexity is enabled on the switch.
Command Mode
Global Configuration mode
3
60