Table of Contents
Advertisement
RMON Commands
show rmon event log
show rmon event log
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
The following table describes significant fields shown in the example:
Field
Index
Type
Community
Description
Last Sent
Owner
To show information for RMON events in the RMON log table, use the show rmon
event log Privileged EXEC mode command.
Syntax
index
show rmon event [
Parameters
index
•
—(Optional) The RMON event index. (Range: 1 to 65535)
Command Mode
Privileged EXEC mode
Example
The following example shows information for the event 1 in the RMON log table:
switchxxxxxx# show rmon event 1 log
Maximum table size: 500 (800 after reset)
Description
Unique index that identifies this event.
Type of notification that the device generates about
this event. The available values are none, log, trap, and
log-trap. In the case of log, an entry is made in the log
table for each event. In the case of trap, a SNMP trap is
sent to one or more management stations.
If a SNMP trap is to be sent, it is sent with the SNMP
community string specified by this octet string.
Comment describing this event.
The time that this entry last generated an event. If this
entry has not generated any events, this value is zero.
The entity configured this event.
] log
30
383
Advertisement
Table of Contents
