Table of Contents
Advertisement
Port Monitor Commands
no monitor session
no monitor session
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
session-number
•
vlan-id
•
vlan
—Specifies the remote VLAN for a RSPAN source session. The
VLAN is used to copy traffic to another device. (Range: 2 to 4094)
Command Mode
Global Configuration mode
Example
The following example defines the source remote-span VLAN 2 for the monitor
session 1:
switchxxxxxx(config)# vlan 2
switchxxxxxx(config-vlan)# remote-span
switchxxxxxx(config-vlan)# exit
switchxxxxxx(config)# monitor session 1 source remote-span vlan 2
To disable all monitor sessions or disable a specific monitor session, use the no
monitor session Global Configuration mode command.
Syntax
session number
no monitor session {
Parameters
session number
•
•
all—Disables all monitor sessions.
•
local—Disables a local monitor session.
•
remote—Disables a RSPAN session.
Default Configuration
N/A
—RSPAN monitor session number. (Range: 1 to 4)
| all | local | remote}
—A specific monitor session to be disabled. (Range: 1 to 4)
27
376
Advertisement
Table of Contents
