Show Ipv6 Mld Max-Group - Cisco 220 Series Smart Plus Reference Manual

IPv6 MLD Snooping Commands

show ipv6 mld max-group

show ipv6 mld max-group
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
po3 : None
po4 : None
po5 : None
po6 : None
po7 : None
po8 : None
To display the maximum number of IPv6 MLD groups on a specific interface or all
interfaces, use the show ipv6 mld max-group Privileged EXEC mode command.
Syntax
show ipv6 mld max-group [interfaces
Parameters
interface-id
• interfaces
interface IDs. The interfaces can be one of these types: Ethernet port or
port channel.
Command Mode
Privileged EXEC mode
User Guidelines
If no interface is specified, the information for all interfaces is displayed.
Example
switchxxxxxx# show ipv6 mld max-group interfaces fa5
Port ID | Max Group
---------+--------------
fa5 : 512
interface-id
—(Optional) Specifies an interface ID or a list of
]
19
296