Table of Contents
Advertisement
TACACS+ Commands
tacacs-server default-param
tacacs-server default-param
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Field
IP Address
Port
Key
To define the default TACACS+ parameters, use the tacacs-server default-param
Global Configuration mode command.
Syntax
tacacs-server default-param [key
Parameters
key-string
•
key
encrypting the TACACS+ communications between the switch and the
TACACS+ server. This key must match the encryption used on the
TACACS+ daemon. To specify an empty string, enter "". (Length: 0 to 128
characters)
timeout
•
timeout
before the connection between the switch and the TACACS+ server times
out. (Range: 1 to 30 seconds)
Default Configuration
N/A
Command Mode
Global Configuration mode
Description
IP address or hostname of the TACACS+ server.
TCP port number of the TACACS+ server for
authentication requests. The value of zero indicates
that the host is not used for authentication.
Key for authenticating and encrypting the TACACS+
communications between the switch and the
TACACS+ server.
key-string
—(Optional) Specifies the key for authenticating and
—(Optional) Specifies the number of seconds that passes
timeout
] [timeout
]
37
463
Advertisement
Table of Contents
