Show Power Inline Consumption - Cisco 220 Series Smart Plus Reference Manual

Power over Ethernet (PoE) Commands

show power inline consumption

show power inline consumption
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the inline power consumption for all interfaces or for a specific interface,
use the show power inline consumption Privileged EXEC mode command.
Syntax
show power inline consumption [interfaces
Parameters
• interfaces interface-id
interface IDs. The interface must be an Ethernet port.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays the inline power consumption for port 1:
switchxxxxxx# show power inline consumption interfaces gi1
Port Max.Power (Admin) Power
(mW)
---- ----------------- -------- -------- --------
gi1 30000 (30000)
The following table describes the significant fields shown in the example:
Field
Port
Max. Power (Admin)
Power
Voltage
Current
interface-id
—(Optional) Specifies an interface ID or a list of
Voltage Current
(mW) (mV)
0 0 0
Description
Interface number.
Maximum amount of power in milliwatts allocated to
the selected interface.
Amount of power in milliwatts assigned to the
powered device connected to the selected interface.
Voltage of the power.
Current in milliampere of the power.
]
(mA)
25
368