Qos Map Queue-Cos - Cisco 220 Series Smart Plus Reference Manual

QoS Commands

qos map queue-cos

qos map queue-cos
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# qos map precedence-queue 2 to 7
To configure the queue-to-CoS map, use the qos map queue-cos Global
Configuration mode command.
Syntax
qos map queue-cos
Parameters
queue-list
• —Up to eight queue numbers to map to the specified CoS value.
(Range:1 to 8)
cos-id
• to —Specifies the CoS value to which the queue values are mapped.
Default Configuration
Queue-to-CoS mapping matrix
Queue 1
COS 1
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# qos map queue-cos 7 to 2
queue-list cos-id
to
2 3 4
0 2 3
5 6 7
4 5 6
28
8
7
395