Table of Contents
Advertisement
IPv6 MLD Snooping Commands
ipv6 mld snooping vlan immediate-leave
ipv6 mld snooping vlan immediate-leave
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Parameters
VLAN-LIST
•
—A VLAN ID or a range of VLAN IDs. (Range: 1 to 4094)
Default Configuration
MLD snooping is disabled on all VLANs.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# ipv6 mld snooping vlan 100
To enable MLD snooping immediate leave processing on the VLANs, use the ipv6
mld snooping vlan immediate-leave Global Configuration mode command.
To revert to its default setting, use the no form of this command.
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Parameters
VLAN-LIST
•
—A VLAN ID or a range of VLAN IDs on which both MLD
snooping and immediate leave are enabled.
Default Configuration
MLD immediate leave processing is disabled.
VLAN-LIST
VLAN-LIST
VLAN-LIST
immediate-leave
VLAN-LIST
immediate-leave
19
282
Advertisement
Table of Contents
