Table of Contents
Advertisement
SNMP Commands
snmp-server location
snmp-server location
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
The default SNMP version is SNMPv1.
Command Mode
Global Configuration mode
User Guidelines
Use the snmp-server user, snmp-server group, and snmp-server view commands
to create a SNMP user, a SNMP group, or a SNMP view.
Example
switchxxxxxx(config)# snmp-server host 1.1.1.121 abc
To set the system location, use the snmp-server location Global Configuration
mode command.
Syntax
snmp-server location
Parameters
location
•
—The system location. (Length: 0 to 256 characters)
Default Configuration
No location name is defined.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# snmp-server location NewYork
location
32
445
Advertisement
Table of Contents
