Show Port-Security - Cisco 220 Series Smart Plus Reference Manual

Address Table Commands

show port-security

show port-security
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx # show mac address-table aging-time
Mac Address Table aging time:
To show the port security status, use the show port-security Privileged EXEC
mode command.
Syntax
show port-security interfaces
Parameters
interface-id
• interfaces
Ethernet interface IDs.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show port-security interfaces fa1-10
Port | Mode
Trap Freq
300
interface-id
—Specifies an Ethernet interface ID or a list of
| Security | CurrentAddr |
5
Action |
96