Cisco 220 Series Smart Plus Reference Manual page 503

System Management Commands
ping
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
ipv6-address
ping ipv6 {
Parameters
ipv4-address
• —IPv4 address to ping.
ipv6-address
• —Unicast or multicast IPv6 address to ping.
hostname
• —Hostname to ping.
packet_count
• count
The default is 4 packets. (Range: 1 to 65535)
Default Usage
N/A
Command Mode
Privileged EXEC mode
Examples
Example 1—The following example pings an IP address:
switchxxxxxx# ping ip 10.1.1.1
PING 10.1.1.1 (10.1.1.1): 56 data bytes
--- 10.1.1.1 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
Example 2—The following example pings a site:
switchxxxxxx# ping ip yahoo.com
Pinging yahoo.com [66.218.71.198] with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11
Example 3—The following example pings an IPv6 address:
switchxxxxxx# ping ipv6 3003::11
hostname packet_count
| } [count
—(Optional) Specifies the number of packets to send.
36
]
453