Table of Contents
Advertisement
CDP Commands
show cdp traffic (Interface)
show cdp traffic (Interface)
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the CDP traffic counters per interface, use the show cdp traffic Privileged
EXEC mode command.
Syntax
interface-id
show cdp traffic [
Parameters
•
interface-id
—(Optional) The interface ID or a list of interface IDs. If the ID is
not specified, this command will display the CDP counters for all interfaces.
Command Mode
Privileged EXEC Mode
User Guidelines
CDP statistics for an interface are only displayed if CDP is enabled globally and on
the interface.
Example
switchxxxxxx# show cdp traffic
fa1 :
Total packets output: 0, Input: 0
Hdr syntax: 0, Chksum error: 0, Invalid packet: 0
No memory in main cache: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 0, Input: 0
fa2 :
Total packets output: 0, Input: 0
Hdr syntax: 0, Chksum error: 0, Invalid packet: 0
No memory in main cache: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 0, Input: 0
fa3 :
Total packets output: 0, Input: 0
Hdr syntax: 0, Chksum error: 0, Invalid packet: 0
No memory in main cache: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 0, Input: 0
fa4 :
Total packets output: 0, Input: 0
Hdr syntax: 0, Chksum error: 0, Invalid packet: 0
No memory in main cache: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 0, Input: 0
]
7
120
Advertisement
Table of Contents
