Table of Contents
Advertisement
Line Commands
silent-time
silent-time
speed
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To set the login fail silent time, use the silent-time Line Configuration mode
command.
Syntax
value
silent-time
Parameters
•
value
—The number of seconds to disable the console after login failure.
(Range: 0 to 65535. 0 indicates no silent-time)
Default Configuration
No silent time
Command Mode
Line Configuration mode
Example
switchxxxxxx(config)# line console
switchxxxxxx (config-line)# silent-time 10
To set the console port baud rate, use the speed Line Configuration mode
command.
To revert to the default setting, use the no form of this command.
Syntax
bps
speed
no speed
Parameters
bps
•
—The baud rate in bits per second (bps). Possible values are 2400,
4800, 9600, 19200, 38400, 57600, and 115200 bps.
21
315
Advertisement
Table of Contents
