Cisco 220 Series Smart Plus Reference Manual page 119

CDP Commands
show cdp neighbor
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
• detail—(Optional) Displays detailed information about a CDP neighbor (or
neighbors) from the main cache.
Command Mode
Privileged EXEC Mode
Example
switchxxxxxx# show cdp neighbor
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - VoIP Phone
M - Remotely-Managed Device, C - CAST Phone Port,
W - Two-Port MAC Relay
Device ID
------------------ ----------- ---- -------- ---------- ------------ --------
The following table describes the significant fields shown in the example:
Field
Device ID
Local Interface
Adv Ver.
Holdtime
Capability
Platform
Port ID
Local Adv Holdtime Capability
Interface Ver.
Description
Neighbor's device ID.
Number of the local interface to which the neighbor is
connected.
CDP protocol version.
Time interval in seconds after which the information for
this neighbor is deleted.
Capabilities advertised by neighbor.
Information from Platform TLV of neighbor.
Interface number of the neighbor through which the
frame arrived.
7
Platform Port ID
117