Table of Contents
Advertisement
Address Table Commands
mac address-table static
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
mac-address
•
—MAC address of the interface.
vlan-id
•
vlan
—VLAN ID for the interface.
interface-id
•
interfaces
The interface can be one of these types: Ethernet port or port channel.
•
delete-on-reboot—(Optional) Specifies that the static MAC address is
never aged out of the table and will be deleted after the switch reboots.
•
delete-on-timeout—(Optional) Deletes the MAC address when aging
occurs.
•
permanent—(Optional) Specifies that the static MAC address never be
aged out of the table and if it is saved to the Startup Configuration, it is
retained after rebooting. The keyword is applied by the default.
•
secure—(Optional) Specifies that the MAC address is secure when the
interface is in classic locked mode.
•
drop—Drops the packets with the specified source or destination unicast
MAC address.
Default Configuration
No static addresses are defined. The default mode for an added address is
permanent.
Command Mode
Global Configuration mode
User Guidelines
Use the command to add a static MAC address with the given time-to-live in any
mode or to add a secure MAC address in a secure mode.
Each MAC address in the MAC address table is assigned two attributes: type and
time-to-live.
The following time-to-live values are supported:
•
delete-on-reboot—A MAC address is saved until the next reboot.
•
delete-on-timeout—A MAC address that may be removed by the aging
timer.
•
permanent—A MAC address is saved until it is removed manually.
—Specifies an interface ID or a list of interface IDs.
5
91
Advertisement
Table of Contents
