Cisco 220 Series Smart Plus Reference Manual page 424

RADIUS Commands
show radius-server default-param
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
The following table describes the significant fields shown in the example:
Field
Retries
Timeout
Key
Description
Default number of requests that are sent to the
RADIUS server before a failure is considered to have
occurred.
Default number of seconds that the switch waits for an
answer from the RADIUS server before retrying the
query, or switching to the next server.
Default key for authenticating and encrypting the
RADIUS communications between the switch and the
RADIUS server.
29
422