Table of Contents
Advertisement
GVRP Commands
show gvrp
show gvrp
show gvrp configuration
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the GVRP configuration, use the show gvrp Privileged EXEC mode
command.
Syntax
show gvrp
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show gvrp
GVRP
--------------------
GVRP
Join time
Leave time
LeaveAll time
To show the GVRP configuration on specific interfaces, use the show gvrp
configuration Privileged EXEC mode command.
Syntax
show gvrp configuration [interfaces
Parameters
interface-id
•
interfaces
interface IDs. The interfaces can be one of these types: Ethernet port or
port channel.
Status
: Disabled
: 200 ms
: 600 ms
: 10000 ms
interface-id
—(Optional) Specifies an interface ID or a list of
]
12
182
Advertisement
Table of Contents
