Traceroute - Cisco 220 Series Smart Plus Reference Manual

System Management Commands

traceroute

traceroute
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
switchxxxxxx# show version
Cisco Sx220 Series Switch Software, Version 1.0.0.16, RELEASE SOFTWARE
Copyright (c) 2014 by Cisco Systems, Inc.
Compiled Wed Feb 26 16:02:49 UTC 2014
ROM: Bootstrap program is Sx220 boot loader
BOOTLDR: Sx220 Boot Loader Version , RELEASE SOFTWARE
Compiled
switchxxxxxx uptime is 1 days, 1 hours, 31 mins, 26 secs
system image is image-2
Processor 500MHz , with 128M bytes of memory.
28 Gigabit Ethernet interfaces
0 Fast Ethernet interfaces
32M bytes of flash memory
Base MAC Address : 00:E0:4C:86:70:01
IP Address : 192.168.1.254
Subnet Mask : 255.255.255.0
Model Number : SG220-28MP
Serial Number :
PID :
VID : V01
To show the routes that the packets will take when traveling to their destination,
use the traceroute Privileged EXEC mode command.
Syntax
ipv4-address
traceroute {
Parameters
ipv4-address
• —IPv4 address of the destination host.
hostname
• —Hostname of the destination host.
hop-count
• max_hop
a region before the BPDU is discarded. (Range: 2 to 255, default : 30)
Default Usage
The default value of hop-count is 30.
hostname
| } [max-hop
—(Optional) Specifies the number of maximum hops in
hop-count
]
36
465