Table of Contents
Advertisement
RMON Commands
show rmon alarm
show rmon alarm
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
The default bucket value is 50.
The default interval value is 180 seconds.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# rmon history 1 interface fa11 buckets 50 interval 300
owner john
To display information for a specific RMON alarm or for all RMON alarms, use the
show rmon alarm Privileged EXEC mode command.
Syntax
show rmon alarm {all |
Parameters
•
all—Displays all alarms.
index
•
—Information for a specific RMON alarm. (Range: 1 to 65535)
Command Mode
Privileged EXEC mode
Example
The following example displays information of the RMON alarm 1:
switchxxxxxx# show rmon alarm 1
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
index
}
30
380
Advertisement
Table of Contents
