Crypto Certificate Generate - Cisco 220 Series Smart Plus Reference Manual

Telnet and SSH Commands

crypto certificate generate

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To create a self-signed certification for HTTPS, use the crypto certificate generate
Global Configuration mode command.
Syntax
crypto certificate generate
Parameters
N/A
Default Configuration
N/A
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# crypto certificate generate
Generating a 1024 bit RSA private key
...................................................................++++++
...........++++++
writing new private key to '/mnt/ssl_key.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:
State or Province Name (full name) [Some-State]:
Locality Name (eg, city) []:
38
466