Table of Contents
Advertisement
VLAN Commands
show interfaces switchport
show interfaces switchport
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show interfaces protected-ports gi11
Port
| Protected State
-------+-----------------
gi11 |enabled
To show the administrative and operational status for all interfaces or a specific
interface, use the show interfaces switchport Privileged EXEC command.
Syntax
show interfaces switchport
Parameters
interface-list
•
—Specifies an interface ID or a list of interface IDs. The
interface can be one of these types: Ethernet port or port channel.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Examples
Example 1—The following example displays the command output for a trunk port:
switchxxxxxx# show interface switchport gi1
Port : gi1
Port Mode : Trunk
Gvrp Status : disabled
Ingress Filtering : enabled
Acceptable Frame Type : all
Ingress UnTagged VLAN ( NATIVE ) : 1
Trunking VLANs Enabled: 1,3-4,6-7,10
interface-list
41
503
Advertisement
Table of Contents
