Table of Contents
Advertisement
IGMP Snooping Commands
ip igmp snooping vlan mrouter
ip igmp snooping vlan mrouter
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
VLAN-LIST
•
—A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
seconds
•
—The interval in seconds at which IGMP group-specific host query
messages are sent on the interface. (Range: 1 to 25)
Default Configuration
1
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# ip igmp snooping vlan 3 last-member-query-interval 2
To enable automatic learning of multicast router ports on a VLAN, use the ip igmp
snooping vlan mrouter Global Configuration mode command.
To remove the configuration, use the no form of this command.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
VLAN-LIST
•
—A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
VLAN-LIST
last-member-query-interval
VLAN-LIST
last-member-query-interval
VLAN-LIST
mrouter learn pim-dvmrp
VLAN-LIST
mrouter learn pim-dvmrp
13
seconds
208
Advertisement
Table of Contents
