LLDP Commands
show lldp local-device
show lldp local-device
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show LLDP information that is advertised from specific interfaces, use the show
lldp local-device Privileged EXEC mode command.
Syntax
show lldp [interfaces
Parameters
•
interfaces
interface-id
interface IDs. If not specified, the command displays some common
information of local device.
Command Mode
Privileged EXEC mode
Examples
Example 1—The following example displays the LLDP local device information
that is advertised from fa11:
switchxxxxxx# show lldp interfaces gi11 local-device
Device ID: 00:E0:4C:86:70:01
Port ID: gi11
System Name: switchxxxxxx
Capabilities: Bridge
System description: 28-Port Gigabit PoE Smart Plus Switch
Port description:
Time To Live: 120
802.1 PVID: 1
LLDP-MED capabilities: Capabilities, Network Policy
LLDP-MED Device type: Network Connectivity
Example 2—The following example displays the LLDP local device information:
switchxxxxxx# show lldp local-device
LLDP Local Device Information:
Chassis Type : Mac Address
Chassis ID
: DE:AD:BE:EF:01:02
System Name
: SwitchEF0102
System Description
System Capabilities Support : Bridge
interface-id
] local-device
—(Optional) Specifies an interface ID or a list of
:
22
339