Clear Cdp Counter - Cisco 220 Series Smart Plus Reference Manual

CDP Commands

clear cdp counter

clear cdp counter
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
seconds
• —Enter the rate in seconds at which CDP advertisement updates
are sent. (Range: 5 to 254 seconds)
Default Configuration
The default transmission timer is 60 seconds.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# cdp timer 200
To reset the CDP traffic counters to 0, use the clear cdp counter Privileged EXEC
Mode command.
Syntax
clear cdp counter
Parameters
N/A
Command Mode
Privileged EXEC Mode
Example
switchxxxxxx# clear cdp counter
7
113