Clock Source; Clock Summer-Time - Cisco 220 Series Smart Plus Reference Manual

Clock Commands

clock source

clock source

clock summer-time

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To configure an external time source for the system clock, use the clock source
Global Configuration mode command.
Syntax
clock source {sntp | local}
Parameters
• sntp—Specifies an SNTP server as the external clock source.
• local—Specifies the local time settings.
Default Configuration
The default is to use the local time as the source of the system clock.
Command Mode
Global Configuration mode
Example
The following example configures the SNTP server as an external time source:
switchxxxxxx(config)# clock source sntp
To enable the switch to automatically switch to the summer time (Daylight Saving
Time), use the clock summer-time Global Configuration mode command.
To disable this feature, use the no form of this command.
Syntax
zone
clock summer-time
month date HH:MM
}} [offset]
zone
clock summer-time
[offset]
week date month HH:MM week
recurring {usa | eu | {
month day year HH:MM month day year HH:MM
date
8
125