Table of Contents
Advertisement
QoS Commands
show qos aggregate-policer
show qos aggregate-policer
NOTE
show qos interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show information for specific aggregate policers, use the show qos aggregate-
policer Privileged EXEC mode command.
This command is available only when the switch is in QoS advanced mode.
Syntax
show qos aggregate-policer [
Parameters
aggregate-policer-name
•
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show qos aggregate-policer policer1
aggregate-policer policer1 96000 exceed-action drop
To show the QoS configuration on all interfaces or on an interface, use the show
qos interfaces Privileged EXEC mode command.
Syntax
show qos interfaces
Parameters
interface-id
•
—An interface ID or a list of interface IDs. The interface can be
one of these types: Ethernet port or port channel.
Default Configuration
N/A
aggregate-policer-name
—(Optional) The aggregate policer name.
interface-id
28
]
405
Advertisement
Table of Contents
