Table of Contents
Advertisement
RMON Commands
show rmon event
show rmon event
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Falling Threshold
Rising Event
Falling Event
Owner
To show information for a specific RMON event or for all entries in the RMON event
table, use the show rmon event Privileged EXEC mode command.
Syntax
show rmon event { all |
Parameters
•
all—Displays all RMON events.
index
•
—The RMON event index to be displayed. (Range: 1 to 65535)
Command Mode
Privileged EXEC mode
Example
The following example displays all entries in the RMON event table:
switchxxxxxx# show rmon event all
Rmon Event Index
Rmon Event Type
Rmon Event Community
Rmon Event Description :
Rmon Event Last Sent
Rmon Event Owner
Sampled statistic falling threshold. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval is greater
than this threshold, a single event is generated.
Event index used when a rising threshold is crossed.
Event index used when a falling threshold is crossed.
Entity that configured this entry.
index
}
: 10
: Log
:
:
(0) 0:00:00.00
:
30
382
Advertisement
Table of Contents
