Figure 9-8 Choosing A Circuit Source; Figure 9-9 Choosing A Vlan Name And Id - Cisco ONS 15327 User Documentation

Ethernet Circuit Configurations
Figure 9-8
Step 12 Choose the circuit source from the Node menu. Either end node can be the circuit source.
Step 13 If you are building a Multicard EtherSwitch circuit, choose Ethergroup from the Slot menu and click
Next.
Step 14 If you are building a Single-card EtherSwitch circuit, from the Slot menu choose the Ethernet card where
you enabled the Single-card EtherSwitch and click Next.
The Circuit Creation (Destination) dialog box opens.
Choose the circuit destination from the Node menu. Choose the node that is not the source.
Step 15
If you are building a Multicard EtherSwitch circuit, choose Ethergroup from the Slot menu and click
Step 16
Next.
If you are building a Single-card EtherSwitch circuit, from the Slot menu choose the Ethernet card for
Step 17
which you enabled the Single-card EtherSwitch and click Next.
The Circuit Creation (Circuit VLAN Selection) dialog box appears.
Create the VLAN:
Step 18
Click the New VLAN tab.
a.
Assign an easily identifiable name to your VLAN
b.
Figure 9-9
c. Assign a VLAN ID.
Cisco ONS 15327 User Documentation, R3.3
9-8
Choosing a circuit source
Choosing a VLAN name and ID
Chapter 9
(Figure 9-9).
Ethernet Operation
June 2002