Figure 9-26 Creating Rmon Thresholds - Cisco ONS 15327 User Documentation

Chapter 9 Ethernet Operation
Table 9-9
Variable
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
etherStatsPkts1024to1518Octets
etherStatsJabbers
etherStatsCollisions
etherStatsCollisionFrames
etherStatsCRCAlignErrors
Procedure: Creating Ethernet RMON Alarm Thresholds
Display the CTC node view.
Step 1
Click the Provisioning > Etherbridge > Thresholds tabs.
Step 2
Click Create.
Step 3
The Create Ether Threshold dialog box appears.

Figure 9-26 Creating RMON thresholds

From the Slot menu, choose the appropriate Ethernet card.
Step 4
June 2002
Ethernet Threshold Variables (MIBs) (continued)
Remote Monitoring Specification Alarm Thresholds
Definition
Total number of packets received (including error packets) that
were 65–172 octets in length
Total number of packets received (including error packets) that
were 128–255 octets in length
Total number of packets received (including error packets) that
were 256–511 octets in length
Total number of packets received (including error packets) that
were 512–1023 octets in length
Total number of packets received (including error packets) that
were 1024–1518 octets in length
Total number of packets longer than 1518 octets that were not an
integral number of octets or had a bad FCS
Best estimate of the total number of collisions on this segment
Best estimate of the total number of frame collisions on this
segment
Total number of packets with a length between 64 and 1518
octets, inclusive, that had a bad FCS or were not an integral
number of octets in length
Cisco ONS 15327 User Documentation, R3.3
9-33