Adding Onus To Olt - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

12.4.3.3 Adding ONUs to OLT

This topic describes how to add ONUs to the OLT. ONUs can be configured only after they are
added to the OLT successfully.
Context
l
l
Issue 01 (2014-04-30)
When adding ONUs, you need to bind related profiles to the ONUs, including the DBA
profile, line profile, service profile, and alarm profile. For the functions of each profile and
how to configure profiles, see
Table 12-49 ONU profile
Profile Function
Type
DBA Describes GPON traffic
profile parameters. A T-CONT is
bound to a DBA profile for
dynamic bandwidth allocation,
improving upstream bandwidth
utilization.
Line Describes the binding
profile relationship between T-CONTs
and DBA profiles, QoS mode of
service flows, and mapping
between GEM ports and
services on ONUs.
Service Describes the parameters of the
profile ONT managed by the OLT in
OMCI mode.
Alarm Provides a series of alarm
profile threshold parameters that are
used for performance
measurement and monitoring of
activated ONU lines.
An ONU can be added in two modes. Select either mode as required.
Mode Usage Scenario
Offline The password or serial number
addition of an ONU has been obtained.
Online The password and serial number
confirmat of an ONU are unknown.
ion
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 FTTO Configuration(SOHO and SME)
Table 12-49.
Command
Query: display dba-profile
Add: dba-profile add
Query: display ont-lineprofile
Add: ont-lineprofile add
Query: display ont-srvprofile
Add: ont-srvprofile add
Query: display gpon alarm-profile
Add: gpon alarm-profile add
Command
Run the ont add command to add the
ONU.
Run the port ont-auto-find command in
the GPON mode to enable the automatic
discovery function for the GPON port
and run the ont confirm command to
add the ONU.
1237