ABB IRC5 Operating Manual page 578

5 Troubleshooting by event log
5.12 13 xxxx
Continued
135001, Material change suspended.
Description
Material change was suspended due to an internal or external
error.
Recommended actions
Fix the problem and recover material change.
135002, Material change cancelled.
Description
Material change was ordered to cancel.
135003, Material change resumed.
Description
Material change was recovered after being in suspended state.
135010, Material change initialization error.
Description
Unable to subscribe to interface signals.
Recommended actions
Check that there is valid configuration loaded for the interface
signals in IPS.
135011, Material change initialization error.
Description
Unable to open material change configuration file: arg
Recommended actions
Check that the file exists.
135012, Material change initialization error.
Description
The file 'arg' is missing the 'arg' tag.
Recommended actions
Fix the problem in the file.
135013, Material change initialization error.
Description
The file 'arg' contains an invalid system type: arg
Recommended actions
Fix the problem in the file.
Continues on next page
578
135021, Material change index file error.
Description
Unable to open index file: arg
Recommended actions
Check that the file exists.
135022, Material change index file error.
Description
The file 'arg' contains an invalid index: arg
Recommended actions
Fix the problem in the file.
135031, Material change system index error.
Description
Material index arg is missing an action specifier.
Recommended actions
Fix the problem in the file: arg
135041, Material change cavity index error.
Description
Material index arg on cavity 'arg' does not have a cleaning
sequence.
Recommended actions
Fix the problem in the file: arg
135042, Material change cavity index error.
Description
Material index arg on cavity 'arg' does not have a filling
sequence.
Recommended actions
Fix the problem in the file: arg
135051, Material change sequence error.
Description
Unable to open sequence file: arg
Recommended actions
Check that the file exists.
135052, Material change sequence error.
Description
The file 'arg' contains invalid data on line: arg
© Copyright 2005-2018 ABB. All rights reserved.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA