ABB IRC5 Operating Manual page 112

5 Troubleshooting by event log
5.3 1 xxxx
Continued
Recommended actions
Check earlier events in the event log for the reason why this
task could not start.
11020, Backup error
Description
An error occurred while preparing to create a backup.
Unknown error.
Consequences
The backup request is aborted.
No backup was created.
Recommended actions
arg
11024, Backup error
Description
An error occurred while preparing to create a backup.
A directory/file couldn't be created.
Consequences
The backup request is aborted.
No backup was created.
Probable causes
You may not have write access to the backup drive.
The drive might be full.
If it is a network drive, you might have lost connection.
Recommended actions
Verify that the backup drive isn't write protected If it is a network
drive, verify that controller hasn't lost contact
11025, Backup error
Description
An error occurred while preparing to create a backup.
The backup directory couldn't be created.
Consequences
The backup request is aborted.
No backup was created.
Probable causes
The path might be too long.
You may not have write access to the backup drive.
The drive might be full.
If it is a network drive, you might have lost connection.
Recommended actions
Verify that the backup drive isn't write protected If it is a network
drive, verify that controller hasn't lost contact
Continues on next page
112
11026, Backup error
Description
An error occurred while preparing to create a backup.
Error while creating the backinfo.txt file.
Consequences
The backup request is aborted.
No backup was created.
Probable causes
You may not have write access to the backup drive.
The drive might be full.
If it is a network drive, you might have lost connection.
Recommended actions
Verify that the backup drive isn't write protected If it is a network
drive, verify that controller hasn't lost contact
11029, Backup error
Description
An error occurred while preparing to create a backup.
The given backup path is too long.
Consequences
The backup request is aborted.
No backup was created.
Probable causes
The given backup path has exceeded the maximum allowed
arg characters.
Recommended actions
Use a shorter path to create the backup.
11031, Backup error
Description
An error occurred while preparing to create a backup.
Error while searching for a file/entry.
Consequences
The backup request is aborted.
No backup was created.
Recommended actions
arg
11036, Backup error
Description
An error occurred while preparing to create a backup.
Write error.
© Copyright 2005-2018 ABB. All rights reserved.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA