ABB IRC5 Operating Manual page 499

GAP Error posted from PartCrossCheckOK routine.
PartCrossCheckOK not ok.
111405, GAP Execution Error
Description
BeforePart or AfterPart Sync Timeout in arg.
111406, Event execution error
Description
Event procedure: arg in task arg does not exist
Recommended actions
Create the procedure arg or change the procedure in the
ee_event data arg to an existing procedure.
111407, GAP Execution Error
Description
Error in GAPExecCycle: arg
111408, GAP Execution Error
Description
WaitSyncPart Timeout: arg in arg.
111409, GAP Execution Error
Description
Error in GapExecPart: arg.
111410, No part selected for station
Description
No part selected for station arg in task arg.
111411, GAP Execution Error
Description
Part station number is invalid: arg
Valid station: arg
Next station: arg
111412, Not matching tasklists in tasks
Description
Tasklist in partdata arg in task arg does not match tasklist in
partdata arg in task arg.
Recommended actions
Check and change the tasklists so they match.
Operating manual - Troubleshooting IRC5
3HAC020738-001 Revision: AA
111413, Invalid task name
Description
Taskname arg in partdata is invalid
111414, GAP Execution Error
Description
The tasklist must include 'this' task: arg
111415, GAP Execution Error
Description
Task: arg
Tasks could not be cross-checked. Station: arg
111416, GAP Execution Error
Description
GapEE_Stopped failed in task: arg
111417, GAP Access IO Error
Description
GAP Access IO Error in task: arg
111419, GAP cfg data error
Description
Cfg data not found in InstancePath: arg
Attribute: arg
111420, GAP IO Error
Description
GAP IO Error in shared module.
111421, GAP Task Error
Description
Maximum of GAP tasks defined (arg).
111422, GAP event error
Description
arg GAP_EE_EVT
Unknown event id: arg
111423, GAP proc error
Description
GAP_EE_EVT Unknown proc arg
© Copyright 2005-2018 ABB. All rights reserved.
5 Troubleshooting by event log
Continues on next page
5.10 11 xxxx
Continued
499