Table of Contents
Advertisement
Chapter 11 - Using the Trip Function
Erasing a single
waypoint
Restarting the track at the trip screen
Page 11-14
To permanently erase all the trip points after the selected one,
but not the selected one (with this option, you can only erase
points after the active waypoint):
1. At the TRIP screen, select the point at which all other
points after it will be erased, then press the ERASURES
key.
2. Press the ERASE AFTER key.
The 961 erases all the selected trip points, and returns to
the TRIP screen.
To erase a single trip point:
1. At the TRIP screen, select the desired point.
2. Press the ERASURES key.
3. Press the ERASE CURRENT key.
The 961 erases the trip point and returns to the TRIP
screen.
To restart the track from your present position to the active
waypoint (this changes your current track, but not the trip):
1. At the TRIP screen, select the active waypoint.
2. Press the GO TO SELECTION key.
The RESTART HERE dialog box appears.
961 Operations and Reference Manual Rev. D
Advertisement
Table of Contents
