Table of Contents
Advertisement
Creating a track by
defining start and
end date/time
961 Operations and Reference Manual Rev. D
•
pressing the NEW TRACK key to define the track's start
and end times on the TRACKS screen
•
pressing the START SAVING key to immediately start
defining a new track now
To create a new track by start and end date/time:
1. Press the WAYPTS/ROUTES key to access the TRACKS
screen, then press the NEW TRACK key.
A field for the new track appears on the screen, and the
cursor goes to the NAME field. The END field is set to the
present date and time, and the START field is set to 24
hours earlier than now.
2. Use the KEYPAD to enter a name for the new track (or use
the default name, which starts with a T followed by four
digits). The name can be up to 15 characters.
3. To adjust the start date and time, press the CURSOR PAD
right to highlight the START field, which defaults to the
date. To change the start date, which can't be before your
961's installation date, press the LEFT ARROW key to
select a desired date. To change the start hour, press the
Chapter 9 - Creating Tracks
New track screen
Page 9-7
Advertisement
Table of Contents
