Table of Contents
Advertisement
961 Operations and Reference Manual Rev. D
To set up your CHART screen to display position coordinates
as loran TDs in addition to lat/lon, see "Changing the chart
setup" starting on page 13-23.
To show your position coordinates and other navigational data
on the CHART screen, press either of the two INFO keys (the
second INFO key will appear only after you press the INFO key
at the bottom of the screen): Several forms of numeric naviga-
tional data appear—in large, easy-to-read numbers—at the bot-
tom of the screen in an INFO BAR.
Each successive press of either INFO key shows the present
nav data, in the following order:
1. speed-over-ground and course-over-ground (SOG and
COG).
2. lat/lon coordinates (LATITUDE and LONGITUDE).
3. your preferred GRI (GRI) and the best pair of loran
TDs—only available if you've chosen to display position
coordinates as loran TDs at the CHART SETUP screen.
4. active waypoint, if any; distance and bearing to the active
waypoint; cross-track error (XTE); estimated time of
arrival (ETA) as day and time; and estimated time enroute
Chapter 1 - Quick Start
Chart screen with info bars
Page 1-21
Advertisement
Table of Contents
