Table of Contents
Advertisement
961 Operations and Reference Manual Rev. D
You can also perform any of these functions at the
screen; for details, see "Following a route from the routes screen"
starting on page 10-6.
Following a route by choosing a starting waypoint
1. On the ROUTES screen, press the CURSOR PAD up or
down to select the desired route.
2. To display the route on the CHART screen, press the ON
CHART key, then press the CHART key.
3. On the CHART screen, press the CURSOR PAD to select
the starting waypoint of the route.
The name of the selected route point must appear in the
CURSOR INFO BAR at the bottom of the screen; if neces-
sary, press the LEFT ARROW and RIGHT ARROW keys.
4. Press the CURSOR menu key.
The SELECTED ROUTE POINT dialog box appears.
Chapter 10 - Waypoint and Route Navigation
NOTE:
Selected route point dialog box
ROUTES
Page 10-11
Advertisement
Table of Contents
