Table of Contents
Advertisement
961 Operations and Reference Manual Rev. D
•
update a waypoint's coordinates to be the same as your
vessel's position.
To move a waypoint to another location:
1. At the CHART screen, press the CURSOR PAD and if nec-
essary, the LEFT ARROW and RIGHT ARROW keys, to
select a named waypoint, then press the CURSOR menu
key.
2. Press the EDIT key.
The 961 returns to the CHART screen, showing the
selected waypoint.
3. Press the CURSOR PAD to move the cursor and the way-
point to the desired location.
4. Press the DONE key to store the waypoint coordinates to
the waypoint database (or press the CANCEL key to can-
cel).
5. If this waypoint is used in the trip or one or more routes,
the 961 will always ask if you want to keep the original
coordinates as unnamed points in the trip or routes (if so,
press the KEEP OLD COORDS key), or use the new coor-
dinates instead (press the USE NEW COORDS key).
The 961 returns to the CHART screen, showing the new
location of the waypoint and its position data in the CUR-
SOR INFO BAR.
To update a waypoint's coordinates to be the same as your
vessel's position:
1. At the CHART screen, press the CURSOR PAD to select an
existing waypoint, then press the CURSOR menu key.
2. At the SELECTED WAYPOINT dialog box, press the EDIT
key.
3. When your vessel is at the position where you want the
selected waypoint to be, press the UPDATE key.
4. If the selected waypoint is used in one or more routes or
the trip, the 961 asks if you want to keep the original
coordinates as unnamed points in the route or trip (if so,
press the KEEP OLD COORDS key), or use the new coor-
dinates instead (press the USE NEW COORDS key).
Chapter 6 - Creating Waypoints
Page 6-15
Advertisement
Table of Contents
