Table of Contents
Advertisement
Navigating from the waypoints screen
Going to a selected
waypoint now
961 Operations and Reference Manual Rev. D
3. Press the ADD TO END OF TRIP key.
The 961 creates a new waypoint named COORD, adds it
to the end of your trip, and returns to the CHART screen.
If you were already past the end of the trip, you'll immedi-
ately begin navigating along the leg to the new waypoint.
Instead of selecting a waypoint at the CHART screen, you may
prefer to select one from a list of existing waypoints displayed
on the WAYPOINTS screen. After you select a waypoint, you
can go to it now or add it to the end of your trip.
1. Press the WAYPTS/ROUTES key to access the WAY-
POINTS screen.
Because the waypoints you navigate to are usually
nearby, the 961 automatically highlights the DISTANCE
column, which sorts the entire list by distance from your
position—with the closest waypoints at the top of the list.
2. Press the CURSOR PAD up or down to highlight the
desired waypoint.
Chapter 10 - Waypoint and Route Navigation
Selected cursor position dialog box
Page 10-17
Advertisement
Table of Contents
