Table of Contents
Advertisement
Chapter 14 - Service and Maintenance Functions
Service functions
Viewing product
information
Page 14-2
This section explains the SERVICE MENU screen options for
viewing product information, configuring the receivers, setting
up the ports, viewing GPS status, and saving and restoring
databases and system logs at the SERVICE MENU screen.
The 961's PRODUCT INFORMATION screen provides you with
access to current information about the 961's control head,
processor, GPS receiver, and DGPS receiver (if installed). To
display these functions, press the STAR key until you reach
the SERVICE MENU screen, then press the PRODUCT INFOR-
MATION key to display the following screen:
Viewing head 1 serial number and software revision
The complete 961 system comprises two or three serial num-
bers—one for each control head and one for the processor. The
serial number of the control head is affixed to the back of the
unit, and also is permanently programmed into the 961's data-
base. You can view this serial number at the PRODUCT
INFORMATION screen, in the HEAD 1 SN/SW REVS field.
Product information screen
961 Operations and Reference Manual Rev. D
Advertisement
Table of Contents
