Table of Contents
Advertisement
Chapter 4 - Understanding the Chart Screen
INFO BAR, press and hold an INFO key for two or more sec-
onds, and the INFO BAR slides down off the CHART screen;
upon briefly pressing the same INFO key, the INFO BAR reap-
pears by sliding up. The lower INFO BAR can't be removed if
you're displaying the upper INFO BAR, and the upper INFO
BAR can't be displayed unless you first display the lower INFO
BAR.
For details about using the SAVE key to save your vessel's
Using the save key
position as a waypoint, see "Creating a new waypoint at the
vessel's position" starting on page 6-10.
For details about using the SAVE key to save your vessel's
position as part of a new route, see "Creating a route as you
travel" starting on page 8-10.
Using the cursor on the chart screen
On the CHART screen, pressing the CURSOR PAD instantly
displays a cursor—shown as a square red window—that lets you
view other areas of the chart or designate points on the chart.
Using the cursor, you can view any area on the current chart
by moving the cursor to that particular location. Whenever
you display the cursor, the CURSOR INFO BAR is shown at the
bottom of the screen. This CURSOR INFO BAR shows the dis-
tance and bearing from your vessel to the cursor, as well as the
cursor's position coordinates. Note that the top menu key and
the bottom menu key on the CHART screen change whenever
you display the cursor.
961 Operations and Reference Manual Rev. D
Page 4-15
Advertisement
Table of Contents
