Table of Contents
Advertisement
Displaying
waypoint symbols
and names
961 Operations and Reference Manual Rev. D
2. Press the CURSOR PAD to highlight any of the WAYPTS
TO DISPLAY lines, then press the EDIT key.
3. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW keys to highlight the desired
waypoint(s).
For each highlighted waypoint, to turn the waypoint on or
off, press the ON/OFF key. To turn all waypoint symbols
on or off, press the ALL/NONE key. To use the 961's
default waypoint symbols, press the DEFAULTS ON key.
4. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
5. Press RETURN twice to go back to the SETUP MENU
screen.
After enabling either individual or all waypoint symbols, you
must ensure that the WAYPT DISPLAY field is set to ON, other-
wise the 961 won't display any of the enabled waypoint sym-
bols on the CHART screen. Here, you can turn on or off the
display of all waypoint symbols on the CHART screen. Also,
Chapter 13 - Customizing Setup Functions
Chart setup screen (waypoints)
Page 13-25
Advertisement
Table of Contents
