Table of Contents
Advertisement
Chapter 10 - Waypoint and Route Navigation
Page 10-16
3. Press the GO NOW key.
The 961 creates a new unnamed waypoint at the cursor
location, returns to the CHART screen, and guides you
directly to this new, temporary waypoint. Press the TRIP
key to see the waypoint in the trip. Note that this point isn't
stored in the waypoint database, and that all unnamed
waypoints are labelled as COORD.
Adding a location on the chart to the end of the trip
1. Press the CURSOR PAD to move the cursor to the desired
location on the CHART screen (to establish a precise posi-
tion for this new waypoint, press the IN or OUT keys to
zoom the chart view in or out.
2. Press the CURSOR menu key.
The SELECTED CURSOR POSITION
appears. If desired, use the KEYPAD to change the coor-
dinates before moving to the next step.You can also view
the coordinates as either lat/lon or TDs by pressing the
TDS, LAT/LON key.
Selected cursor position dialog box
)
961 Operations and Reference Manual Rev. D
dialog
box
Advertisement
Table of Contents
