Table of Contents
Advertisement
961 Operations and Reference Manual Rev. D
•
Use the RESTART HERE key to restart the track line to
the active waypoint (XTE becomes zero) so that your
present position becomes the initial track point (your ves-
sel will subsequently follow any remaining waypoints in
the trip). For details about restarting the track, see
"Restarting the track" starting on page 10-19.
Traditional steer screen
The traditional STEER screen shows your active waypoint, if
any; distance and bearing from your present position to the
active waypoint; XTE (shown numerically, and graphically at
the lower part of the screen); SOG and COG; and ETA and ETE.
Three-dimensional (3-D) steer screen
The 3-D STEER screen shows a panoramic 3-D view with
graphical and numerical data. Graphically, the 3-D STEER
screen shows your active waypoint, if any (shown with a green
flag, or red if it's an MOB waypoint); XTE; nearby trip and route
waypoints (shown with blue flags), and avoidance points
(shown as red circles) all in relation to your desired track (the
dashed center line); and distance and bearing from your
Chapter 3 - Using the Controls
Traditional steer screen
Page 3-15
Advertisement
Table of Contents
