Chapter 11 - Using the Trip Function
Going directly to a
past waypoint and
continuing
Page 11-10
3. Press the JOIN LEG key (or press the CANCEL key to can-
cel).
The 961 goes to the STEER screen, and you're travelling
along the leg to your active waypoint. The 961 has
removed intermediate points from the trip, but your
desired track is the previously defined leg.
To go to a past waypoint, then follow all points from that point
back to the beginning of the trip:
1. At the TRIP screen, select the desired past waypoint.
2. Press the GO TO SELECTION key.
Go to selection dialog box
961 Operations and Reference Manual Rev. D