Table of Contents
Advertisement
Chapter 13 - Customizing Setup Functions
Page 13-40
To ensure that the 961 contains the chart(s) with the
>
most recent date, press the NEWEST VERSION key.
To always replace chart(s) already in the 961, press the
>
ALWAYS OVERWRITE key.
To never replace chart(s) already in the 961, press the
>
NEVER OVERWRITE key.
The 961 displays the LOADING CHARTS dialog box, then
displays the INSERT HCRF CD dialog box, which
prompts you to insert the appropriate Chart CD into the
drive, if necessary.
7 . Remove the Update CD from the drive (keeping this CD
nearby since you'll need it again), and insert the Chart
CD.
8. Press the OK key.
The 961 loads the charts, then at the INSERT HCRF CD
dialog box, the 961 prompts you to insert the same
Update CD back into the drive.
9. Remove the Chart CD from the drive and insert the same
Update CD.
10. Press the OK key.
The 961 updates the charts and displays the LOADING
CHARTS dialog box, then the HCRF SUMMARY dialog
box. Each chart loaded is represented by a different hori-
zontal line, with loading details for the highlighted line dis-
played at the bottom (press the CURSOR PAD up or
down to highlight each individual chart). The far-left col-
umn displays either the word OK, or an error number, if
any. If the 961 displays an error number, write down the
error number and see "Table 12: HCRF chart errors" on
page 13-49.
961 Operations and Reference Manual Rev. D
Advertisement
Table of Contents
