Table of Contents
Advertisement
Going to new
coordinates
961 Operations and Reference Manual Rev. D
•
clear the CHART screen of menu keys and other chart
symbols
•
display in-depth navigation information about your posi-
tion
•
use the SAVE key to save your vessel's position as a way-
point or as part of a route (this can be done from any
screen as well as the CHART screen)
You also can easily create a new route right from the
screen. To make a new route, see "Making a new route" starting on
page 4-22.
To specify new coordinates from the CHART screen, press the
GO TO key and the GO TO COORDINATES dialog box appears.
The 961 displays your most recently used waypoint position as
well as its distance and bearing. If desired, use the KEYPAD to
enter new coordinates (press the TDS,LAT/LON key to switch
between displaying lat/lon and TDs). Press the CURSOR PAD
right to move the cursor to enter longitude. You can also press
the CURSOR PAD down to enter distance and bearing to the
new point, instead of lat/lon or TDs, and the coordinates will
be calculated for you.
Chapter 4 - Understanding the Chart Screen
NOTE:
CHART
Page 4-5
Advertisement
Table of Contents
