Table of Contents
Advertisement
Chapter 8 - Creating Routes
Routes screen sorted by name
The ROUTES screen lists all your existing routes, showing
whether a route is marked for display on the CHART screen,
whether is route is marked to accept SAVE keypresses, route
name, date the route was last modified, total distance covered
by each route (length), and distance to your present position
(proximity). If a route is empty, the length and proximity fields
will contain dashes.
To select a route (indicated by the horizontal stripe), press the
CURSOR PAD up or down.
To the right of the PROXIMITY column is a red vertical slide
bar, which is relative to the size of the list of routes. The
smaller the slider, the larger the list; the larger the slider, the
smaller the list. The slider also indicates your position in the
list, i.e. at the top, in the middle, at the bottom, or anywhere
else in between.
To display individual waypoints of the selected route, use the
edit-route function described later in this chapter, or see "Fol-
lowing a route from the routes screen" starting on page 10-6.
961 Operations and Reference Manual Rev. D
Page 8-5
Advertisement
Table of Contents
