Table of Contents
Advertisement
Chapter 6 - Creating Waypoints
List display
Page 6-4
Displaying waypoint names on the chart screen
You assign each new waypoint a name when you create it; see
"Creating a new waypoint" starting on page 6-7. You then have
the option whether to display the name directly below the
symbol. To turn on or off the display of waypoint names on
the CHART screen, see "Displaying waypoint symbols and
names" starting on page 13-25.
Some waypoints don't have an actual name and don't appear on the
waypoint list because they were created as points in a route or in the
trip. For example,
assigned by the 961 to a waypoint created when selecting a location
CHART
on the
COORD
on the
Displaying waypoints on the waypoints screen
To display a list of named waypoints, press the WAYPTS/
ROUTES key until you reach the WAYPOINTS screen.
NOTE:
COORD
is the default name automatically
screen and navigating to it. This point is labelled
CHART
screen and in the trip.
961 Operations and Reference Manual Rev. D
Waypoints screen
Advertisement
Table of Contents
